Militec-1 grease (or, more correctly, a metal conditioner) is made on a synthetic basis and serves primarily for processing metal parts of weapons, both firearms, and for lubricating the hinges of various kinds of folding knives and knives with automatic and semi-automatic blade ejection mechanisms. Recommended to ensure reliable operation of mechanisms operated in particularly harsh conditions. The main functional purpose of Militec-1 is a liquid-free friction reduction in mechanically interacting joints.
The principle of a metal conditioner. Militec-1 grease, entering into a chemical reaction with the metal of rubbing surfaces, forms a protective film on them and reduces friction in the mechanical joint. Therefore, working with Militec-1 grease assumes that there is no liquid fraction between the rubbing parts. This allows you to avoid such disadvantages inherent in traditional lubricants as the release of oil from the friction area, drying out of the grease in the contact area (as a result, a short service life and risks caused by increased friction), contamination of the liquid lubricant with dust, metal particles, etc.
Implementation guidance. Before applying Militec-1 grease, it is necessary to clean the surface to be treated from dirt, degrease and heat it to 65 ° C using, for example, a hair dryer. (65 ° C is a low temperature. For example, low-temperature tempering of steel is possible only at temperatures above 150 ° C). Apply Militec-1 and rub the rubbing surfaces (fold and unfold the knife several times). After that, the surfaces coated with Militec-1 are wiped dry.Militec-1 grease manufacturer recommends repeating this process two or three more times.
Special instructions. If Militec-1 cannot be applied using the recommended method, it can be used as an additive to a previously applied lubricant. Since Militec-1 does not react with conventional greases, air conditioner particles are incorporated into the old grease to form a conglomerate. At the same time, in the course of work (friction of moving parts), Militec-1 particles are deposited on the metal surface and fulfill their main purpose.
