Jende Resin Bonded Diamond

Diamond resin stones work on all steel types and even ceramic knives and are designed to clean up and continue to bring the edge to a mirror finish after coarser Jende diamond plates.

Jende Resin Bonded Diamond 15 µm (~1000 grit) is an excellent cleanup stone to remove deeper scratches left by coarser plates and stones. It can also be used for routine maintenance and sharpening. This stone leaves a very good working sharp edge.

Jende Resin Bonded Diamond 9 µm (~2,000 grit) further refines the edges from the 15-µm diamond resin stone and can be used for light repair and general maintenance sharpening. It leaves an even better quality work sharp edge. The 9-µm diamond resin stone also begins to polish and sets things up for further refinement sharpening and polishing.

Jende Resin Bonded Diamond 6 µm (~3,000 grit) begins to refine and polish the edge leaving a high level of sharpness and some very good shine. The 6-µm diamond resin stone is best for maintenance, sharpening, preparation for full-out mirrors, and further refinement.

 
Jende Resin Bonded Diamond 3 µm (~6,000 grit) is a keystone slicing-edge and mirror polishing. It is an excellent touching-up stone and sets the edge up for the 1 µm or further refinement with stones, strops, or Jende diamond films.

Jende Resin Bonded Diamond 1 µm (~15,000 grit) takes the mirror and edge of the 3 microns to the next level with just enough room to go a little further with 20K stones, strops, and emulsions up to 0.025 microns, or Jende diamond 0.5-µm films.

 Jende diamond resin stones are splash and go and are meant to be used with water. Let them air dry between use. The size is 1" x 6" x 6mm in size, and it comes mounted to a standard 1x6 blank that fits the Hapstone sharpening systems.

Tips

-- Use a moderate amount of water when sharpening with this stone to avoid the black swarf buildup. A cleaner surface will cut faster than one with a lot of swarf.

Jende Diamond Resin Stone is available in 5 grits:

• 15 µm - 1000 grit
  
• 9 µm - 2000 grit
• 6 µm - 3000 grit
• 3 µm - 6000 grit
• 1 µm - 15000 grit

Characteristics:

•     Stone size: 150x24x3mm (6x1")
•     Blank size: 160x24x3mm
•     Acrylic layer: 150x24x3mm
•     Bond: organic
•     Material: diamond
•     Concentration: 100%